Offer Description:
I am the COO of a U. S. Company. For purposes of manufacturing, I am looking to obtain pricing for Pure Sputtering Targets consisting of the following metals as detailed, and in APPROX. The size as detailed, with some small deviation acceptable in order to obtain 99.9% + Targets which are Substantially or Close to Equivalent in Dimensions as follows...
1.75 mm / The quarter, short for quarter dollar, is a United States coin worth 25 cents, one-fourth of a dollar. It has a diameter of. 955 inches (24.26 mm) and a thickness of. 069 inches (1.75 mm)
As stated 24mm by. 070mm, or 25mm by. 069mm ^or Minute or single digit percentile deviations which are CLOSE to the Above will be acceptable, particularly if you have such APPROX. Sizing already in Stock. You most probably have 24mm X 1.75mm as a Standard Size, which would be Completely Acceptable.
I am initially looking to obtain 50 to 100 total Targets for Final Prototyping, but then will seek to obtain a reliable supply thereafter for Production Runs. (Most probably in China).
As such, can you please QUOTE the Pure Sputtering Targets BY Metal, and BY Volume for the Quantities as follows?
Aluminum 99.995 100 / 500 / 1000 / 2500 / 5000
Titanium99.995% 100 / 500 / 1000 / 2500 / 5000
Nickel 100 / 500 / 1000 / 2500 / 5000
Chromium 99.95% 100 / 500 / 1000 / 2500 / 5000
Cobalt 99.95% 100 / 500 / 1000 / 2500 / 5000
Molybdenum 99.95% 100 / 500 / 1000 / 2500 / 5000
Vanadium 99, 95% 100 / 500 / 1000 / 2500 / 5000
Can you send me prices of your products; Also let me know your Minimum
Order, payment terms and delivery time.
Additional Questions^
1. Are the Sputtering Targets 99.9% + Pure Metal Composition? The ENTIRE TARGET?
Please feel free to reach out to me with additional questions.
I am available 9 to 9 U. S. CST Time, and am located in CHICAGO, Illinois, USA.
With appreciation,
Michael Campagna
1.75 mm / The quarter, short for quarter dollar, is a United States coin worth 25 cents, one-fourth of a dollar. It has a diameter of. 955 inches (24.26 mm) and a thickness of. 069 inches (1.75 mm)
As stated 24mm by. 070mm, or 25mm by. 069mm ^or Minute or single digit percentile deviations which are CLOSE to the Above will be acceptable, particularly if you have such APPROX. Sizing already in Stock. You most probably have 24mm X 1.75mm as a Standard Size, which would be Completely Acceptable.
I am initially looking to obtain 50 to 100 total Targets for Final Prototyping, but then will seek to obtain a reliable supply thereafter for Production Runs. (Most probably in China).
As such, can you please QUOTE the Pure Sputtering Targets BY Metal, and BY Volume for the Quantities as follows?
Aluminum 99.995 100 / 500 / 1000 / 2500 / 5000
Titanium99.995% 100 / 500 / 1000 / 2500 / 5000
Nickel 100 / 500 / 1000 / 2500 / 5000
Chromium 99.95% 100 / 500 / 1000 / 2500 / 5000
Cobalt 99.95% 100 / 500 / 1000 / 2500 / 5000
Molybdenum 99.95% 100 / 500 / 1000 / 2500 / 5000
Vanadium 99, 95% 100 / 500 / 1000 / 2500 / 5000
Can you send me prices of your products; Also let me know your Minimum
Order, payment terms and delivery time.
Additional Questions^
1. Are the Sputtering Targets 99.9% + Pure Metal Composition? The ENTIRE TARGET?
Please feel free to reach out to me with additional questions.
I am available 9 to 9 U. S. CST Time, and am located in CHICAGO, Illinois, USA.
With appreciation,
Michael Campagna
| Category | Metallurgy, Mineral & Energy |
| Posting Date | 2019-06-07 |
| Contact Person | Mr. Michael Campagna |
| Company | Sensiband |
| Address | 33 Overlook Rd. Ste 305, Summit , Nj, United States |
| Country | United States |
No comments:
Post a Comment
Thank you for submitting your comments; every comment is approved manually and may take up to few days, if you consider any mistake, let us know.